What are the common faults of the packer?

This type of machine adopts fully automated planning on the basis of the original baler, which is simpler to operate and has stronger durability. It is an ideal baler. So, let's talk about the common problems of the packer.

1. The jam phenomenon

The jamming phenomenon is mainly manifested as the belt is stuck in the middle of the rollers and cannot be rotated. Perhaps it is blocked by a foreign body and cannot be taken out, resulting in the jam. The two M5 countersunk screws on the center, because these two screws are fixed in the gap part of the connecting shaft, they must be turned up; remove the connecting shaft, pick up the upper turbine, take out the stuck object, and then Just restore the machine to its original state.

2. The strapping machine does not cut after strapping

After strapping, the strapping machine does not cut the straps. Generally, the reason for this situation is that the straps are too tight. The operator needs to adjust the tightness.

3. The strapping machine does not come out

The strapping machine does not release the belt. This kind of fault is quite common. The operator should check whether the “Adjustment of the belt length” is at “0”, and then check whether the threading process is correct; if not, check whether the belt feeding roller is adjacent to the foreign object. .

4. Warm reminder

In daily work, when there is a problem with the baler, it should be repaired according to the relevant symptoms of the machine. Do not deal with it without authorization. Otherwise, it may cause damage to the machine due to improper operation, resulting in a result that cannot be repaired. Manufacturers of packaging equipment such as balers and carton sealing machines are in order to better solve problems for the interests of customers and machinery and equipment, and need to ask specialized personnel to handle them.

In addition, the baler may be other packaging machinery and equipment that requires reasonable use. It is not possible to pack items outside the load-bearing specifications of the baler. Ordinary operators should also pay more attention to the maintenance and maintenance of the machine. This will reduce failures and extend the baler. Service life can also play a role.