Main features of slicer

Main feature

1. The compactly designed independent control panel effectively controls all important operations.

2. The built-in control panel and the independent control panel are fully synchronized. The LCD screen can prompt the total slice thickness and total slice thickness, trimming thickness, slice thickness, and prompt important operation status.

3. Two sample vertical stop positions (up and down)

4. Five slicing modes: single, continuous, stepping, half-cutting, programming

5. The slicing speed is automatically adjusted according to the slice thickness.

6. The trimming function can be turned off. In the automatic state, the parameters of the repair block are automatically adjusted, and in the manual state, the parameters of the repair block can be determined by programming.

7. The slice thickness and trimming thickness can be independently selected and stored.

8. The visual signal and the sound signal indicate the limit of forward and backward movement and the remaining sample distance during sample injection.

Optional cold light source, magnifying glass or stereoscope to meet the needs of semi-thin sectioning, and optional ultra-low temperature liquid nitrogen freezing system for semi-thin sectioning of special samples.

Performance

1. The streamlined cover does not need to be disassembled and is easy to clean; the top tray can be placed on specimen boxes and other objects.

2. The sample clamping system can be adjusted arbitrarily on the three-dimensional axis, which is easy to use.

3. The sample chuck is specially designed for the use of disposable plastic embedding boxes.

4. Completely eliminate the phenomenon of jumping knife, uneven thickness, sticking knife, non-contiguous slices, etc.

5. The ideal slicing effect can be obtained by using a standard slicing steel knife.